Your first design review
Every account gets one full AI review of a KiCad project, schematic and PCB, at no cost and without a card. It takes a few minutes.
1. Drop the project
On the review page, choose the folder with your .kicad_pro, or a .zip of it. Crossprobe parses the schematic and board in the browser and shows what it found: sheets, parts, nets, layers and the results of its own ERC, DRC and parity checks.
Choose the scope (schematic, PCB or both) and, if you like, a focus in your own words, such as "runs from a 2S Li-ion pack; check the USB-C input".
2. Create an account
An email address is enough. The project waits in the browser tab while you sign in, and the review starts when you come back.
3. Read the findings
The model works through the design with read-only tools and records findings as it goes. Each finding has a severity, a short explanation, and the references and nets involved:
- Errors will likely stop the board from working.
- Warnings are risks worth fixing.
- Notes are suggestions and checks to finish by hand.
The summary lists what couldn't be verified, such as ratings that need a datasheet. Download the report as Markdown and keep it with the project.
The review only reads the design. You decide what to change, in KiCad or in the Crossprobe editor. See what the review checks.